Voltera V-One Solder Paste Dispenser
Save hundreds of dollars in stencil costs by skipping them altogether and assemble your boards in half the time.
Mount your boards on the Voltera V-One Printer and dispense paste in minutes regardless of whether they're factory fabbed boards or boards you print on the V-One.
With a 550W heater, the V-One can reach reflow temperatures in under a minute. Use our recommended heating profile, or manually adjust the temperature for complete control.
Key Features:
- Accepts Gerber files
- Built-In Reflow platform
- 0402 min. pad size
- Load up your solder alloy in one of our empty cartridges
All you need to start dispensing paste on your own circuits is to load up your Gerber files from any of these programs:
- Autodesk EAGLE
- Cadence Allegro PCB Designer
- DipTrace
- KiCad
- OrCAD
- Or any other software that exports .gbr files
Populating your boards should be simple. Our software will guide you through the whole process and you'll be able to reflow components at your desk in minutes.
